Cat7 F/FTP Cable: 600 MHz, ISO Only, Connector-Limited
Quick answer / TL;DR: Short answer: Cat7 F/FTP is a 600 MHz shielded cable with foil on each pair and an overall foil, defined by ISO/IEC 11801 rather than TIA. It does not deliver more Ethernet speed than Cat6A, because 10GBASE-T stops at 100 m on both. Its real value is extra bandwidth headroom, tighter alien crosstalk, and a larger margin under EMC testing. Buy it when a specification demands Cat7 or when you want margin, not because you expect a faster network.
One category, three axes: shielding, conductor and jacket create the SKU.Cat7 is defined by ISO/IEC 11801 at 600 MHz. It is not a TIA category, which is the first thing a buyer needs to know, because it means the standard does not recognise a Cat7 channel in the way it recognises Cat6A. The cable exists, it is tested, and it is installed widely in Europe.
F/FTP is the foil-only version of Cat7: each pair wrapped in foil, and one further foil around all four pairs. Where Cat7 S/FTP uses a braid outside, F/FTP stays lighter and more flexible at the same 600 MHz rating.
What Cat7 Adds Over Cat6A
Bandwidth goes from 500 MHz to 600 MHz, which is a 20 percent increase. In practice no common Ethernet standard uses that extra spectrum. 10GBASE-T needs 500 MHz, 25GBASE-T and 40GBASE-T need 2000 MHz and are the domain of Cat8, not Cat7.
What the extra bandwidth buys is margin. A cable that passes 600 MHz has more headroom at 500 MHz, so a channel with six connectors and a few tight bends has a better chance of passing acceptance testing than a Cat6A build at the edge of its limits.
| Category | Bandwidth | 10GBASE-T | 25G and 40GBASE-T | Standard body |
|---|
| Cat6 | 250 MHz | 55 m | no | ISO and TIA |
| Cat6A | 500 MHz | 100 m | no | ISO and TIA |
| Cat7 | 600 MHz | 100 m | no | ISO only |
| Cat7A | 1000 MHz | 100 m | no | ISO only |
| Cat8 | 2000 MHz | 100 m | 30 m | ISO and TIA |
The Connector Problem
This is the part that decides most Cat7 projects. Standard RJ45 is not specified for Cat7. The ISO standard recognises GG45 and TERA connectors for Cat7 channels, and a Cat7 channel built with ordinary RJ45 jacks is a non-standard assembly that no test standard covers.
The industry workaround is Cat7 cable with Cat6A RJ45 jacks, often sold as a Cat7 patch cord. It works, it tests well, and it is honest as long as everyone understands it is a Cat6A channel built on Cat7 cable. What it is not is a compliant Cat7 channel.
- GG45: backward compatible with RJ45, with extra contacts for the higher category
- TERA: a different interface entirely, not RJ45-compatible
- RJ45 on Cat7 cable: common, tests as Cat6A, not a Cat7 channel
- Never mix GG45 outlets with RJ45 patch leads and claim Cat7 performance
F/FTP Versus S/FTP at Cat7
Both reach 600 MHz. S/FTP wraps a braid around the overall foil, which improves mechanical robustness and low-frequency shielding. F/FTP omits the braid, so it is thinner, lighter and more flexible, and it terminates with fewer steps.
For a data centre cross-connect in a controlled environment, F/FTP is the sensible choice. For a factory or a route shared with power, S/FTP earns its cost. The bandwidth is identical, so this is again a handling decision rather than a performance one.
Real-World Applications
European commercial specifications that name Cat7
Some public sector and healthcare specifications still name Cat7, often carried over from a decade-old template. In that situation the cable choice is made by the document, and F/FTP with GG45 outlets is the compliant answer. Do not substitute Cat6A without a written variation.
Laboratories with strict EMC acceptance criteria
Where a room has to pass an emissions test, the extra shielding depth and bandwidth margin of Cat7 F/FTP gives the test engineer room to work. The gain over Cat6A is small but the acceptance threshold does not care about small.
Long-term building infrastructure
A building designed for a 20-year life may be cabled above immediate need. Cat7 F/FTP costs more than Cat6A but less than Cat8, and its 600 MHz headroom covers future standards that stay within 600 MHz.
Audio and video over twisted pair
Some AV-over-IP systems benefit from bandwidth headroom and tight crosstalk, particularly where multiple uncompressed streams share a bundle. Cat7 F/FTP gives that margin without the stiffness of a braided construction.
Related reading: The braided Cat7 construction compared — blogs/news/cat7-s-ftp
Related reading: Buying Cat7 without overpaying — blogs/news/cat7-shielded-buying
Standards and Verification
Ask for component test data to IEC 61156-5 at 600 MHz and channel data to ISO/IEC 11801-1. There is no TIA Cat7, so a supplier quoting a TIA Cat7 certificate is either using a different label or misunderstanding the standard, and either way the document is not what it appears.
Confirm the connector standard at the same time. A Cat7 cable tested with GG45 or TERA connectors is a different product from the same cable with RJ45 jacks, and the channel report must name the connector model used.
For EMC-driven projects, request shielding effectiveness data for the combined foil layers and a statement of the bonding method. Cat7 marketing often quotes a single attenuation figure without stating the measurement setup, which cannot be verified.
Cat7 is not recognised as a category in North American premises standards. If the project has a US electrical inspector, expect a request to justify the installation against TIA categories, and have the ISO channel report ready before the inspection.
Frequently Asked Questions
Is Cat7 faster than Cat6A?
No, not for Ethernet. Both support 10GBASE-T to 100 m, and no common standard uses the range between 500 and 600 MHz. Cat7 adds bandwidth margin, not speed. Faster copper Ethernet starts at Cat8, and only to 30 m.
Why is Cat7 not a TIA category?
TIA declined to define Cat7 because the connector question was unresolved in the North American market. ISO defined it with GG45 and TERA, which are common in Europe. The cable is real, the North American channel standard for it is missing.
Can I use Cat7 cable with RJ45 connectors?
You can, and it will typically pass Cat6A testing. What you cannot do is call the result a Cat7 channel, because RJ45 is not a Cat7 connector under ISO. Be precise about this in project documentation and warranty claims.
What is the difference between Cat7 and Cat7A?
Cat7A is defined to 1000 MHz rather than 600 MHz, with tighter alien crosstalk requirements. It is also ISO only. For any existing Ethernet standard the practical difference is margin rather than capability.
Does Cat7 need special grounding?
Yes, the same as any shielded construction: the shield must bond at both ends through shielded jacks and a bonded patch panel. With GG45 or TERA outlets the bonding is usually built into the outlet design, which reduces the risk of an unbonded shield.
Sourcing cables for a project, a store, or a private-label line? Contact our B2B sales team for specifications, certification evidence, and volume terms – FOB and CIF options available. Request a quote or sample.