1000 Ft Cat5e: The Full Reel
Quick answer / TL;DR: Short answer: buy 1000 ft Cat5e when the measured requirement is over about 130 m and the site is committed to gigabit – a small office, a house with many drops, or a maintenance stock. Store it boxed and dry. If 2.5G or 10G is on the roadmap, buy Cat6 or Cat6a instead: the cost difference is small against a re-pull.
Cat5e in three lengths: the line that still fills the budget tier.A 1000 ft Cat5e box is the cheapest cable per metre available in the twisted-pair family: 305 metres of the budget tier, enough for a whole small building. The saving is real and so is the commitment – a full box is capital and shelf space before it is a network.
This is the 1000 ft Cat5e guide: when the full box is the right buy, the storage it needs, and the projects where the budget tier stops being adequate.
The Cost Case
| The purchase | The per-metre position | The commitment |
|---|
| 500 ft box | Higher per metre | Low |
| 1000 ft box | Lowest per metre | High |
| Reel | Similar, easier payout | Needs a stand |
The per-metre advantage only pays if the cable is used; a box that sits for two years has cost more than the difference.
What It Suits
- A whole small building at gigabit
- A house with more than fifteen drops
- A maintenance stock for a site with Cat5e in the walls
- Repeated small jobs over a season
The pattern is volume and a settled requirement – both conditions, not either.
Storage and Handling
| The factor | The practice |
|---|
| Location | Dry, out of sunlight |
| Position | Upright, on its base |
| Remainder | Coiled at a large radius |
| Label | Remaining length written on the box |
A box stored on a damp floor takes water into the jacket, which is the failure the budget tier is least able to absorb.
Standards and Verification
| The reference | The relevance |
|---|
| TIA-568.2-D | Category 5e |
| ISO/IEC 11801-1 | Class D |
| UL 444 | Jacket ratings |
| Field test | Channel test per run |
Per-SKU box lengths are not provided in the knowledge base. Standard boxes apply; check the footage marker at the first pull.
Real-World Applications
The whole-house fit-out
A house with eighteen drops: one 1000 ft box, the runs planned by floor, the footage tracked – the per-metre saving realised because the cable was used.
The stored capital
A 1000 ft box bought for six drops: two years later, three quarters unused and the jacket dusty. A 500 ft box would have been the better purchase.
The upgrade that arrived
A site committed to gigabit that moved to 2.5G: Cat5e could not support it and Cat6 was pulled. The full box had been the cheap part; the labour was not.
Related reading: The 500 ft decision — blogs/news/cat5e-500ft-box
Related reading: What Cat5e costs against Cat6 — blogs/news/cat5e-price
Frequently Asked Questions
Is 1000 ft Cat5e the cheapest per metre?
Yes within the category family – but only if the cable is used.
How many drops will it cover?
Roughly 25-30 typical drops depending on route and loops.
Should I buy it for a small job?
No – a 500 ft box is the better match.
What if I might need 2.5G?
Buy Cat6 instead; the per-metre difference is small against a re-pull.
Sourcing cables for a project, a store, or a private-label line? Contact our B2B sales team for specifications, certification evidence, and volume terms – FOB and CIF options available. Request a quote or sample.
